Fracture analysis of U-notched disc-type graphite specimens under mixed mode loading

Fracture phenomenon was investigated both experimentally and theoretically for a type of coarse-grained polycrystalline graphite weakened by a U-shaped notch under mixed mode loading. First, 36 disc-type graphite specimens containing a central U-notch, so called in literature as the U-notched Brazilian disc (UNBD), were prepared for four different notch tip radii and the fracture tests were performed under mode I and mixed mode I/II loading conditions. Then, the experimentally obtained fracture loads and the fracture initiation angles were predicted by using the U-notched maximum tangential stress (UMTS) and the newly formulated U-notched mean stress (UMS) fracture criteria. Both the criteria were developed in the form of the fracture curves and the curves of fracture initiation angle, in terms of the notch stress intensity factors (NSIFs). The results showed that while the criteria could predict successfully the experimental notch fracture toughness values, the UMS criterion provides slightly better predictions than the UMTS criterion, particularly for shear-dominant deformations. Also, found in this research was that the curves of fracture initiation angle were almost identical for the two criteria which both could predict well the experimental results.