Author/Authors :
Murr، نويسنده , , L.E. and Quinones، نويسنده , , S.A. and Gaytan، نويسنده , , S.M. and Lopez، نويسنده , , M.I. and Rodela، نويسنده , , A. and Martinez، نويسنده , , E.Y. and Hernandez، نويسنده , , D.H. and Martinez، نويسنده , , E. and Medina، نويسنده , , F. and Wicker، نويسنده , , R.B.، نويسنده ,
Abstract :
The microstructure and mechanical behavior of simple product geometries produced by layered manufacturing using the electron beam melting (EBM) process and the selective laser melting (SLM) process are compared with those characteristic of conventional wrought and cast products of Ti–6Al–4V. Microstructures are characterized utilizing optical metallography (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and included α (hcp), β (bcc) and α ′ (hcp) martensite phase regimes which give rise to hardness variations ranging from HRC 37 to 57 and tensile strengths ranging from 0.9 to 1.45 GPa. The advantages and disadvantages of layered manufacturing utilizing initial powders in custom building of biomedical components by EBM and SLM in contrast to conventional manufacturing from Ti–6Al–4V wrought bar stock are discussed.
