Hydroforming of aluminum extrusion tubes for automotive applications. Part I: buckling, wrinkling and bursting analyses of aluminum tubes

Three possible failure modes have been identified in tube hydroforming: buckling, wrinkling and bursting. A general theoretical framework is proposed for analyzing these failure modes as an elastoplastic bifurcation problem. This framework enables advanced yield criteria and various strain-hardening laws to be readily incorporated into the analysis. The effect of plastic deformation on the geometric instability in tube hydroforming, such as global buckling, axisymmetric wrinkling and asymmetric wrinkling, is precisely treated by using the exact plane stress moduli tensor. A mathematical formulation for predicting the localized condition for bursting failure is established herein. Furthermore, the critical conditions governing the onset of buckling, axisymmetric wrinkling and asymmetric wrinkling are derived in closed-form expressions for the critical axial compressive stresses. Closed-form solutions for the critical stress are developed based on Neale–Hutchinsonʹs constitutive equation and an assumed deformation theory of plasticity. It is demonstrated that the onset of asymmetric wrinkling always requires a higher critical axial compressive stress than the axisymmetric one under the context of tube hydroforming with applied internal pressure and hence the asymmetric wrinkling mode can be excluded in the analysis of tube hydroforming. Parametric studies show that buckling and axisymmetric wrinkling are strongly dependent on geometric parameters such as t0/r0 and r0/ℓ0, and that axisymmetric wrinkling is the predominant mode for short tubes while global buckling occurs for long slender tubes.