In-plane elastic moduli and plastic collapse strength of regular hexagonal honeycombs with dual imperfections

The in-plane elastic modulus, Poissonʹs ratio and plastic collapse strength of regular hexagonal honeycombs with dual imperfections of non-straight and variable-thickness cell edges were theoretically derived from a model of curved cell edges with Plateau borders. Finite element analyses (FEA) on the stiffness and strength of regular hexagonal honeycombs with dual imperfections were also performed and then compared to the theoretical modeling. Both analytical and numerical results indicate that the in-plane elastic moduli and plastic collapse strength of regular hexagonal honeycombs with dual imperfections depend on their relative density, the solid distribution in cell edges and the curvature of cell edges. Meanwhile, the effects of dual imperfections on the in-plane elastic moduli and plastic collapse strength of regular hexagonal honeycombs are more drastic as compared to those of each single imperfection. Also, it is found that the normalized in-plane elastic modulus and plastic collapse strength of regular hexagonal honeycombs with dual imperfections are approximately equal to the products of those with each single imperfection.