Buckling of rectangular plates with various boundary conditions loaded by non-uniform inplane loads

In the present paper, buckling loads of rectangular composite plates having nine sets of different boundary conditions and subjected to non-uniform inplane loading are presented considering higher order shear deformation theory (HSDT). As the applied inplane load is non-uniform, the buckling load is evaluated in two steps. In the first step the plane elasticity problem is solved to evaluate the stress distribution within the prebuckling range. Using the above stress distribution the plate buckling equations are derived from the principle of minimum total potential energy. Adopting Galerkinʹs approximation, the governing partial differential equations are converted into a set of homogeneous linear algebraic equations. The critical buckling load is obtained from the solution of the associated linear eigenvalue problem. The present buckling loads are compared with the published results wherever available. The buckling loads obtained from the present method for plate with various boundary conditions and subjected to non-uniform inplane loading are found to be in excellent agreement with those obtained from commercial software ANSYS. Buckling mode shapes of plate for different boundary conditions with non-uniform inplane loadings are also presented.