Coating thickness effects on initial wear of nitrogen-doped amorphous carbon in nano-scale sliding contact: Part I—in situ examination

This paper, the first of a two-part series, presents the empirical data obtained from in situ examination on the generation of wear particles on carbon nitride coatings by a spherical diamond counter-face during repeated sliding contacts. In particular, the effect of coating thickness, varying from 1 to 500 nm, on the generation of wear particles was examined. on the in situ examination, the shape transition maps for generated wear particles were obtained for carbon nitride coatings of various thickness. The results show that the critical number of friction cycles, Nc, for the transition from “no observable wear particles” to “wear particle generation” generally increased with increasing coating thickness. It was noted that up to 20 friction cycles, the maximum Hertzian contact pressure, Pmax, for “no observable wear particles” regime can be increased from 1.39Y to 1.53Y if silicon was coated with carbon nitride coating thicker than 10 nm, where Y is defined as the yield strength of silicon.