Title of article
Sliding friction and wear properties of CNX/TiN composite films
Author/Authors
Liu، نويسنده , , C.S and Zheng، نويسنده , , Z.Y and Wu، نويسنده , , D.W and Ye، نويسنده , , M.S and Gao، نويسنده , , P and Peng، نويسنده , , Y.G and Fan، نويسنده , , X.J، نويسنده ,
Issue Information
ماهنامه با شماره پیاپی سال 2004
Pages
5
From page
721
To page
725
Abstract
A combined dc magnetron sputtering and multi-arc deposition system was used to grow CNX/TiN composite films on a high-speed-steel (HSS) substrate. The thickness of these films is about 3 μm, the hardness of the coating exceeds 50 GPa. The sliding friction properties were studied by ball-on-disc tests under different loads and speeds. The wear mode of the films was observed and analyzed. There exist spallation, abrasion and micro-ploughing wear modes under different loads. The critical load value was theoretically determined and tested to be 55 N. The results show that the alternating films have good wear resistance under heavy load and high speed.
Keywords
Carbon nitride , Composite , Friction
Journal title
Tribology International
Serial Year
2004
Journal title
Tribology International
Record number
1425087
Link To Document