Power losses at low speed in a gearbox lubricated with wind turbine gear oils with special focus on churning losses

In this study gear oils were tested for power loss behaviour in a two stage multiplying gearbox, on a back-to-back test rig with recirculating power. The tests were performed at low input speeds and high input torques with oil sump temperature set free. r loss model simulating the power loss mechanisms was implemented to evaluate gear power losses, but failed to correctly describe the gear churning. bricant flow regimes were identified, which are related to the nature of the fluid circulation, as well as with the gearbox case. A calibration method for the gear churning loss is proposed based on these results and a method to identify the transition between the fluid flow regimes inside the gearbox.