Multi-frequency disturbance rejection via blending control technique for hard disk drives

This paper is concerned with the rejection of multiple narrowband disturbances in hard disk drives (HDDs). Inspired by a control blending idea, the multi-frequency disturbance rejection is formulated as a blending control problem. Each disturbance rejection is accomplished by using the H 2 optimal control method. Based on all H 2 optimal controllers, the blending technique is applied to yield a single controller which is capable of achieving rejection of all disturbances. Rejections of two and three disturbances for a 1.8-inch HDD VCM actuator are taken as application examples in the paper. Simulation and experimental results show that the ultimate controller results in a simultaneous attenuation of disturbances with frequencies higher or lower than the closed-loop system bandwidth. Moreover, the method turns out to be able to lift phase and thus prevent phase margin loss when it is used to deal with disturbances near bandwidth.