Adsorption of bilirubin with polylysine carrying chitosan-coated nylon affinity membranes

Microporous polyamide membranes were activated by bisoxirane and subsequently bound with chitosan (CS) to amplify reactive groups. Then polylysine (PLL) as ligand was immobilized onto the CS-coated nylon membranes. The contents of CS and PLL of PLL-attached membranes were 93.2 and 90.4 mg/g nylon membrane, respectively. Such PLL-attached membranes were used to adsorb bilirubin from the bilirubin–phosphate solution and bilirubin–albumin solution. The adsorption mechanism of bilirubin and the effects of temperature, initial concentration of bilirubin, albumin concentration and ionic strength on adsorption were investigated by batch experiments. The results showed that the adsorption capacity increased with increasing the temperature while decreased with increasing the NaCl concentration and albumin concentration, and the adsorption isotherm fitted the Freundlich model well. The result of dynamic experiment showed PLL-attached membranes can well remove the bilirubin from the bilirubin–albumin solution.