Modelling and simulation of coal gasification process in fluidised bed

A one-dimensional steady state mathematical model and a numerical algorithm have been developed to simulate the coal gasification process in fluidised bed. The model incorporates two phases, the solid and the gas. The gaseous phase participates in the emulsion (with the solid phase) and forms the bubble. The solid phase is composed of carbonaceous material, limestone and/or inert bed material. The model can predict temperature, converted fraction, and particle size distribution for the solid phase. For the gaseous phase, in both emulsion and bubble, it can predict profiles of temperature, gas composition, velocities, and other fluid-dynamic parameters. In the feed zone, a Gaussian distribution for the solid particle size is considered. This distribution changes due to attrition, elutriation, consumption and drag inside the reactor. A system of 29 differential and 10 non-linear equations, derived from the mass, energy and momentum balances for each phase, at any point along the bed height, are solved by the Gear and Adams Method. Experimental data from the Universidad de Antioquia and Universidad Nacional-Medellin have been used to validate the model. Finally, the model can be used to optimise the gasification process by varying several parameters, such as excess of air, particle size distribution, coal type, and geometry of the reactor.