A fundamental study on the control of the HCCI combustion and emissions by fuel design concept combined with controllable EGR. Part 1. The basic characteristics of HCCI combustion

This article investigates the basic combustion parameters including start of the ignition timing, burn duration, cycle-to-cycle variation, and carbon monoxide (CO), unburned hydrocarbon (UHC), and nitric oxide (NOx) emissions of homogeneous charge compression ignition (HCCI) engines fueled with primary reference fuels (PRFs) and their mixtures. Two primary reference fuels, n-heptane and iso-octane, and their blends with RON25, RON50, RON75, and RON90 were evaluated. The experimental results show that, in the first-stage combustion, the start of ignition retards, the maximum heat release rate decreases, and the pressure rising and the temperature rising during the first-stage combustion decrease with the increase of the research octane number (RON). Furthermore, the cumulative heat release in the first-stage combustion is strongly dependent on the concentration of n-heptane in the mixture. The start of ignition of the second-stage combustion is linear with the start of ignition of the first-stage. The combustion duration of the second-stage combustion decreases with the increase of the equivalence ration and the decrease of the octane number. The cycle-to-cycle variation improved with the decrease of the octane number.