Fabrication and characterization of rigid magnetic monodisperse microspheres for protein adsorption

This article describes the fabrication of a rigid magnetic monodisperse bead (M-PGMA-TRI, 4.92 μm) with polyglycidyl methacrylate (PGMA) cross-linked by trimethylolpropane trimethacrylate (TRI). This was realized by adding a proper amount (2%, w/w) of TRI after 3 h of the dispersion-polymerization reaction with the monomer of GMA. The mono-sized microspheres were further processed to introduce magnetic granules by sulfonation and penetration-deposition approaches. The monodisperse bead (M-PGMA) without TRI addition was also fabricated for comparison. The morphology, size and magnetic characteristics of the microspheres were extensively characterized. The M-PGMA-TRI microspheres were nonporous, of smooth surface and superparamagnetic with a saturation magnetization of 13.0 emu/g. Recycled use of the material for protein adsorption exhibited stability of the magnetic properties of the M-PGMA-TRI, as compared to the significant loss of the saturation magnetization of the M-PGMA. The chemical stability of the M-PGMA-TRI was also confirmed by examining its protein adsorption and magnetic properties after incubation in various solutions such as acidic buffer (pH 2.2) for 24 h. The adsorption capacity of γ-globulin reached 287.2 mg/g and kept stable in the repeated adsorption/desorption/regeneration cycles. The results indicated that the introduction of 2% TRI was promising for producing rigid magnetic mono-sized microspheres for protein adsorption.