Factors affecting the suitability of fly ash as source material for geopolymers

The suitability of fly ash stock piles for geopolymer manufacturing was studied. The results of chemical analyses, X-ray diffraction (XRD) and particle size distribution (PSD) of five sources of fly ash obtained from coal-fired power generating plants in the US are presented. Geopolymer paste and concrete specimens were prepared from each stock pile. The specimens were subjected to an array of chemical and mechanical tests including XRD, RAMAN spectroscopy, setting time and compressive strength. A correlation study was undertaken comparing the fly ash precursor chemical and crystallographic compositions as well as particle size distribution, with the mechanical and chemical characteristics of the resulting geopolymer. Factors inherent to the fly ash stockpile such as particle size distribution, degree of vitrification and location of the glass diffraction maximum were found to play an important role in the fresh and hardened properties of the resulting geopolymer.