Electrodeposition and characterization of CdTe thin films on Mo foils using a two voltage technique

Polycrystalline thin film CdTe-based solar cells are one of the most promising candidates for low-cost terrestrial conversion of solar energy because of the optimum energy band gap (Eg=1.44 eV) and high absorption coefficient of CdTe. In this work, a two-step electrodeposition technique has been used to prepare CdTe thin films from acidic solutions. In the first step, a thin Te rich CdTe layer was deposited at –300 mV (SCE) on a Mo foil substrate. On top of this film, a Cd rich CdTe layer was deposited at more negative voltages. The resulting films showed good adherence to the substrate and very low contact resistance between the substrate and the p+ Te rich CdTe layer. The composite film was of nearly stoichiometric composition. From X-ray diffraction results, the as-deposited films show very small grain sizes but after annealing the grain size increases considerably showing very well-defined peaks. The morphological, structural and composition results of CdTe thin films obtained by Scanning Electron microscopy, X-ray diffraction, and X-ray fluorescence will be presented. Electrical properties such as conductivity type and contact resistance values for the Mo/CdTe structures will also be presented.