Author/Authors :
Enr??quez، نويسنده , , Joel Pantoja and Mathew، نويسنده , , Jorge X. Velasco-Hernandez، نويسنده , , G.P. and Pal، نويسنده , , U. and Maga?a، نويسنده , , C. and Acosta، نويسنده , , D.R. and Guardian، نويسنده , , R. and Toledo، نويسنده , , J.A. and Contreras Puente، نويسنده , , G. and Ch?vez Carvayar، نويسنده , , J.A.، نويسنده ,
Abstract :
Development of CdTe/CdS solar cells on flexible metallic substrates is highly interesting due to the light weight and flexible nature of the solar modules. We have deposited CdTe films onto flexible molybdenum substrates using close-spaced sublimation technique and the CdTe/CdS junction was developed by depositing a thin layer of CdS onto the CdTe substrate from a chemical bath. The devices were characterized by Current–voltage (I–V) and photocurrent spectroscopy techniques. Prior to the deposition of the transparent conducting layer, the devices were annealed in air at different temperatures and found that the devices annealed at 400°C have better photovoltaic parameters. The efficiency of a typical device under 60 mW cm−2 illumination was estimated as 3.5%.
Keywords :
CdTe/CdS solar cell , CdTe , CSS , Flexible substrates
