The real utility ranges of the solar selective coatings

The efficiency of the solar selective coatings (ηsel) with various combinations of the optical properties (solar absorptance and thermal emittance), and their impact on the performance of solar thermal systems of different concentration ratios (CRs) have been analyzed. The stagnation temperatures of the selective coatings have been measured using stagnation temperature measurement (STM) chamber. From the results of the simulation study, it is recommended that selective solar absorber coatings should be used only in systems with CR=1 (solar flat plate collectors) and its use in systems with high CR values (parabolic collector) is an additional expenditure with reduced efficiency. The dependence of the performance of the system with CR=1 on the low emittance of the absorber coating has also been experimentally confirmed by the stagnation temperatures recorded for different selective coatings measured in an STM chamber, a system with unit CR. For systems with CR=1, a simple and new parameter, specific area ratio (SAR) has been proposed which further pinpoints the exact solar system wherein the selective coatings are to be used.