Torsional buckling behaviour of stiffened cylinders under combined loading

In this study cylindrical boundary conditions for finite element analysis are formulated that allow torsional displacement and buckling of a sector of a cylinder of half axial height, and of a circumferential arc angle that will divide into 360°. Finite element tests are carried out on un-stiffened elastic cylinders to verify the method of analysis against classical elastic torsional buckling theory. c–plastic limit point finite element tests are carried out on ring and stringer stiffened and stringer stiffened cylinders to investigate the effects of stiffeners on post-buckling behaviour in torsion. nger stiffened cylinder is subjected to many combinations of axial force and surface pressure in the elastic range of response and then tested to failure in torsion to investigate the effects of axial and surface pressure loads on the resistance to plastic collapse in torsion.