Stub column tests of thin-walled complex section with intermediate stiffeners

A series of stub column tests on complex sections with intermediate stiffeners is presented in this paper. Initial geometric imperfections and material properties of the test specimens were measured. It is shown that the intermediate stiffeners could effectively enhance the local buckling stress of thin-walled sections. The test strengths are compared with the design strengths calculated using the direct strength method in the North American Specification and Australian/New Zealand Standard for cold-formed steel structures. It is shown that the direct strength method using finite strip method to obtain the buckling stresses is very conservative. Therefore, finite element method was used to predict the elastic buckling stresses. It is shown that the design strengths calculated using direct strength method based on the buckling stresses obtained from finite element analysis results generally agree with the test results well.