Title of article :
Pre-friction diffusion hybrid bonding of Zr55Cu30Ni5Al10 bulk metallic glass
Author/Authors :
Chen، نويسنده , , H.Y. and Cao، نويسنده , , J. and Song، نويسنده , , X.G. and Si، نويسنده , , G.D. and Feng، نويسنده , , J.C.، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2013
Abstract :
A new joining method, pre-friction diffusion hybrid bonding, was proposed to achieve a BMG/BMG joint without macroscopic deformation. This method employed the pre-friction process to break the oxide film of BMG specimens. The average shear strength of joints bonded by this method was 194.38 MPa, which is much higher than the conventional diffusion bonding. No observable crystallization was detected by MF-XRD and TEM. This novel joining method provided a feasible route for the high-quality solid-state bonding of materials with surface oxide film.
Keywords :
B. Diffusion , B. Glasses , B. Surface properties , D. Microstructure , B. Thermal stability , metallic
Journal title :
Intermetallics
Journal title :
Intermetallics
