Nanocrystalline Al3Ni2 alloy with high hardness produced by mechanical alloying and high-pressure hot-pressing consolidation

An elemental powder mixture corresponding to Al3Ni2 phase stoichiometry was subjected to mechanical alloying. A metastable nanocrystalline AlNi intermetallic phase with the mean crystallite size of 12 nm was formed upon milling. Heating of the synthesised powder in a calorimeter up to 720 °C caused phase transformation into an equilibrium Al3Ni2 intermetallic phase with the mean crystallite size of 41 nm. The product of mechanical alloying was consolidated at 1000 °C under the pressure of 5 GPa and 7.7 GPa. During consolidation, a phase transformation analogous with the one observed in the course of heating in the calorimeter took place. Both bulk materials have nanocrystalline structure with mean crystallite size of 67 nm and 58 nm, the smaller one in the sample consolidated under the higher pressure. The hardness of the produced Al3Ni2 intermetallic is 8.81 GPa (898 HV1) and 8.72 GPa (887 HV1), while the specific yield strength, estimated using the Tabor relation, is 624 kNm/kg and 617 kNm/kg for the sample hot-pressed under 5 GPa and 7.7 GPa respectively. On the basis of the obtained results, we can assume that the quality of consolidation with preserving a nanocrystalline structure is satisfactory and the hardness as well as the estimated specific yield strength of the produced materials are relatively high.