Use of solid–liquid distribution coefficients to determine retention properties of Porapak-Q resins: Determination of optimal conditions to isolate alkyl-methoxypyrazines and beta-damascenone from wine

The solid–liquid distribution coefficients of different analytes – all of which are important aroma compounds – between hydroalcoholic solutions or wines and different sorbents have been determined by measuring the amount of analyte removed by a given mass of sorbent in equilibrium with a given volume of standard solution. These data have shown that the best extraction conditions for non-polar compounds from wine are the use of Porapak-Q resins and 6% (v/v) alcoholic solutions. Phase ratio, hold-up volumes and number of plates for Porapak-Q beds have been measured in different experiments. With all these data it has been possible to calculate breakthrough volumes in good agreement with experimental results. The Lövkvist–Jönsson model is more appropriate for estimating breakthrough volumes of a 2-cm Porapak-Q bed. The model estimates that a 5-cm bed is needed to achieve a quantitative recovery of 3-alkyl-2-methoxypyrazines and β-damascenone from 500 ml of wine (diluted to 1000 ml with water). Experimental results confirm the predictions of the model and show that in a single isolation step detection limits below 10 ng/l can be reached for these compounds using GC–MS detection.