Heterogeneous catalyzed biodiesel production from Moringa oleifera oil

In this study, biodiesel was produced from Moringa oleifera oil using sulfated tin oxide enhanced with SiO2 (SO42−/SnO2–SiO2) as super acid solid catalyst. The experimental design was done using design of experiment (DoE), specifically, response surface methodology based on three-variable central composite design (CCD) with alpha (α) = 2. The reaction parameters studied were reaction temperature (60 °C to 180 °C), reaction period (1 h to 3 h) and methanol to oil ratio (1:6 to 1:24). It was observed that the yield up to 84 wt.% of Moringa oleifera methyl esters can be obtained with reaction conditions of 150 °C temperature, 150 min reaction time and 1:19.5 methanol to oil ratio, while catalyst concentration and agitation speed are kept at 3 wt.% and 350–360 rpm respectively. Therefore this study presents the possibility of converting a relatively new oil feedstock, Moringa oleifera oil to biodiesel and thus reducing the worldʹs dependency on existing edible oil as biodiesel feedstock.