• Title of article

    Rape oil transesterification over heterogeneous catalysts

  • Author/Authors

    Encinar، نويسنده , , J.M. and Gonzلlez، نويسنده , , J.F. and Pardal، نويسنده , , A. and Martيnez، نويسنده , , G.، نويسنده ,

  • Issue Information
    روزنامه با شماره پیاپی سال 2010
  • Pages
    7
  • From page
    1530
  • To page
    1536
  • Abstract
    This work studies the application of KNO3/CaO catalyst in the transesterification reaction of triglycerides with methanol. The objective of the work was characterizing the methyl esters for its use as biodiesel in compression ignition motors. The variables affecting the methyl ester yield during the transesterification reaction, such as, amount of KNO3 impregnated in CaO, the total catalyst content, reaction temperature, agitation rate, and the methanol/oil molar ratio, were investigated to optimize the reaction conditions. olution of the process was followed by gas chromatography, determining the concentration of the methyl esters at different reaction times. The biodiesel was characterized by its density, viscosity, cetane index, saponification value, iodine value, acidity index, CFPP (cold filter plugging point), flash point and combustion point, according to ISO norms. The results showed that calcium oxide, impregnated with KNO3, have a strong basicity and high catalytic activity as a heterogeneous solid base catalyst. odiesel with the best properties was obtained using an amount of KNO3 of 10% impregnated in CaO, a methanol/oil molar ratio of 6:1, a reaction temperature of 65 °C, a reaction time of 3.0 h, and a catalyst total content of 1.0%. In these conditions, the oil conversion was 98% and the final product obtained had very similar characteristics to a no. 2 diesel, and therefore, these methyl esters might be used as an alternative to fossil fuels.
  • Keywords
    Transesterification , Rape oil , Heterogeneous catalyst , KNO3/CaO catalyst , Biodiesel characterization , Methanolysis
  • Journal title
    Fuel Processing Technology
  • Serial Year
    2010
  • Journal title
    Fuel Processing Technology
  • Record number

    1509403