Determination of halonitromethanes in treated water

As halonitromethanes (HNMs) have begun to play an increasingly important role as disinfection by-products, the development of a highly sensitive method for their analysis has become a priority. The mass spectrometric behavior of the 9 HNMs revealed that trihalonitromethanes are more unstable than di- or monohalonitromethanes under common chromatographic conditions. The absence of a comprehensive method for HNMs has given rise to the development of the first method for the whole array of these species, involving the selection of a solventless technique. Single drop microextraction in the headspace mode (HS-SDME) was selected as it is inexpensive and easy to operate. Comparative measurements through EPA liquid–liquid extraction (LLE) method for halogenated volatile compounds, show this approach to be superior to the manual LLE procedure (the average limits of detection (LODs) for the 9 HNMs were 0.5 and 1 μg/L for the HS-SDME and EPA methods, respectively), adequate precision (8.2 and 7.0% for HS-SDME and EPA methods, respectively) and does not consume excessive solvent since the total extract (∼2 μL) was injected completely into the GC–MS instrument. The method was used to measure HNMs in treated water and the results were compared to the EPA method in parallel.