Elution behavior of polyethylene in polar mobile phases on a non-polar sorbent

Linear polyethylene standards in the range of 1–500 kg/mol, dissolved in 1,2,4-trichlorobenzene, were injected into a column packed with oligo(dimethylsiloxane) modified silica gel. Fifteen polar solvents (cyclohexanone, cyclohexylacetate, cyclohexanol, nonylalcohol, dimethylformamide, dimethyl sulfoxide, ethylene- and diethylene glycol monobutyl ether, benzylalcohol, hexylacetate, bis(2-ethyl-hexyl)phthalate, N,N-dimethylacetamide, propylene carbonate, dipropylene glycol and N-methyl-pyrrolidone) were evaluated as mobile phases. Depending on the type of mobile phase evaluated, different elution behaviors are observed for polyethylene: (1) polyethylene was eluted in the size exclusion mode, (2) polyethylene was eluted together with the sample solvent peak at constant elution volume, (3) polyethylene was partially or fully retained on the column. The retained polymer was easily removed from the column by injecting a small volume of trichlorobenzene. The use of ethylene glycol monobutyl ether as the mobile phase enabled separation of the polyethylene from polypropylene. In this case polypropylene is eluted in the size exclusion mode, while polyethylene is eluted at a constant elution volume or remains in the column.