Reliability of the retention factor estimations in liquid chromatography

The retention factor is one of the most universally used parameters in chromatography. However, large differences in the experimental retention factor values are observed when the same compound is injected in a given stationary/mobile phase system under intermediate precision conditions. Conventional protocols for estimating retention factors have problems that mainly arise from difficulties in the hold-up time measurements and the omission of the existence of extra-column times by practicing chromatographers. In the present paper, three different approaches for estimating retention factors are tested: (i) classical retention factor estimations based on the gross hold-up time, (ii) based on the real hold-up time (taking into account the extra-column time), and (iii) a new approach that uses ‘relative’ retention factors based on the use of an external standard. Assays are performed in micellar liquid chromatography (MLC) under intermediate precision conditions (different days, equipments, columns lengths, and mobile phase flow rates). The reliability of the three approaches tested is evaluated by means of precision studies, analysis of factors affecting retention factors, and uncertainty calculations. The approach based on ‘relative’ retention factors was found to be the most precise, reliable, and robust strategy for estimating retention factors.