Investigation of an enantioselective non-aqueous capillary electrochromatography system applied to the separation of chiral acids

A weak anion-exchange type chiral stationary phase (CSP) based on tert.-butylcarbamoylquinine as chiral selector and silica as chromatographic support was applied to non-aqueous capillary electrochromatography. The mobile phases used consisted of acetonitrile and methanol as organic solvents, and acetic acid and triethylamine were added as background electrolytes. The influence of several experimental parameters (electrolyte concentration, acetic acid–triethylamine ratio, acetonitrile–methanol ratio and temperature) was evaluated in order to obtain improved enantioselectivity and efficiency as well as short run times for the enantiomeric separation of negatively charged chiral analytes including benzyloxycarbonyl, N-(3,5-dinitrobenzyloxycarbonyl, 9-fluorenylmethoxycarbonyl, benzoyl, acetyl and N-(2,4-dinitrophenyl) derivatized amino acids and profens. Solvent composition of acetonitrile–methanol (80:20) and enhanced electrolyte concentrations up to 600 mM acetic acid at a constant acid–base ratio of 100:1 with high applied voltages of −25 kV proved to be optimum regarding short retention times and improved efficiencies. For example, the enantiomers of Fmoc-Leu could be separated in less than 10 min with a resolution factor of 6.9 and about 100 000 theoretical plates per meter.