An evaluation of the nonlinear/non-Gaussian filters for the sequential data assimilation

This paper aims to investigate several new nonlinear/non-Gaussian filters in the context of the sequential data assimilation. The unscented Kalman filter (UKF), the ensemble Kalman filter (EnKF), the sampling importance resampling particle filter (SIR-PF) and the unscented particle filter (UPF) are described in the state-space model framework in the Bayesian filtering background. We first evaluated those methods with a simple highly nonlinear Lorenz model and a scalar nonlinear non-Gaussian model to investigate the filter stability and the error sensitivity, and then their abilities in the one-dimensional estimation of the soil moisture content with the synthetic microwave brightness temperature assimilation experiment in the land surface model VIC-3L. All the results are compared with the EnKF. The advantages and disadvantages of each filter are discussed. sults in the Lorenz model showed that the particle filters are suitable for the large measurement interval assimilation and that the Kalman filters were suitable for the frequent measurement assimilation as well as small measurement uncertainties. The EnKF also showed its feasibility for the non-Gaussian noise. The performance of the SIR-PF was actually not as good as that of the UKF or the EnKF regarding a very small observation noise level compared with the uncertainties in the system. In the one-dimensional brightness temperature assimilation experiment, the UKF, the EnKF and the SIR-PF all proved to be flexible and reliable nonlinear filter algorithms for the low dimensional sequential land data assimilation application. For the high dimensional land surface system that takes the horizontal error correlations into account, the UKF is restricted by its computational demand in the covariance propagation; we must use the EnKF, the SIR-PF and other covariance reduction algorithms. The large computational cost prevents the UPF from being applied in practice.