Author/Authors :
معصومي، رضا نويسنده , , باسي، انيكو نويسنده Department of Petroleum Engineering, Kuban State University of Technology, Krasnodar, Russia Bassey, Iniko , سرگي ويكتوروويچ، داگلو نويسنده Department of Petroleum Engineering, Kuban State University of Technology, Krasnodar, Russia Sergei Viktorovich, Dolgow
Abstract :
In this study, miscible gas injection methods have been investigated in Khesht oil field of Iran and actual data of the field is used to modeling process. For this study first EOS of the reservoir fluid was made by using PVTi simulator. Then slim-tube simulator is used in order to obtain MMP for both CO2 and Solvent gases. Then with respect to the obtained EOS which is provided by PVTi simulator, dynamic model of this field provided by using numerical simulator. After that the best scenario with respect to the highest oil recovery factor selected and the effects of both CO2 and Solvent gases compared at the same time. At the end the results of miscible gas injection project have been considered.
