Generating a reference trajectory with defined kinematics for the IRb-6 manipulator

The fundamental problem in industrial robots control concerns algorithms generating reference trajectories. nces [1–4] suggest generating algorithms of a reference trajectory, which are based on an arbitrary discretization of the manipulatorʹs internal coordinates. Each point of discretization in the external space approximating a reference trajectory corresponds to known discretized internal coordinates of the manipulator. 7], iteration methods of determining the internal coordinates corresponding to external coordinates of the reference trajectory point have been suggested. In this method of internal coordinates, determining the point of the reference trajectory is being approached in successive steps of an iterative computation. In [5], a modified iterative method of generation of a straight segment reference trajectory has been presented. ic formulae, which are the solution of an inverse problem of manipulator kinematics, enable design of trajectory generating algorithms which compute, in one step only, the internal coordinates of points lying exactly on the reference trajectory, with the accuracy resulting from the computer register length. s paper, the author has presented an original PLAN2 computer algorithm generating reference trajectories of motion for a task. The kinematics of those trajectories is defined at selected points through which a task is to be passed, the distances between them being optional. The algorithm is based on formulae which are analytic solutions to an inverse problem for an IRb-6 manipulator kinematics.