Novel regenerated cellulose films prepared by coagulating with water: Structure and properties

Regenerated films were successfully prepared from cellulose/NaOH/urea solution by coagulating with water at temperature from 25 to 45 °C. The results of solid 13C NMR, wide angle X-ray diffraction, scanning electron microscopy (SEM) and tensile testing revealed that the cellulose films possessed homogeneous structure and cellulose II crystalline, similar to that prepared previously by coagulating with 5 wt% H2SO4. By changing the coagulation temperature from 25 to 45 °C, tensile strength of the films was in the range of 85–139 MPa. Interestingly, the RC35 film coagulated at 35 °C exhibited the highest tensile strength (σb = 139 MPa). The inclusion complex associated with cellulose, NaOH and urea hydrates in the cellulose solution were broken by adding water (non-solvent), leading to the self-association of cellulose to regenerate through rearrangement of the hydrogen bonds. This work provided low-cost and “green” pathway to prepare cellulose films, which is important in industry.