Preparation and characterisation of fly ash based geopolymer mortars

Geopolymer mortars with varying levels of sand aggregate were prepared and their physical and mechanical properties studied. The geopolymer binder to sand aggregate weight ratio was varied from 9 to 1. Compressive strength and Young’s modulus of the fly ash based geopolymer paste were 60 MPa and 2.27 GPa and these values did not change significantly with addition of up to 50 wt.% sand aggregate. Geopolymer binder exhibited strong bonding to the sand aggregate. Increasing sand content without increasing the amount of alkaline activator resulted in a decreasing level of geopolymerisation within the binder system.