Starch as a modifier for asphalt paving materials

This paper investigates the viability of using starch (ST) as a new modifier for asphalt paving materials. Different ratios of ST (2.5, 5.0, and 7.5% by weight of asphalt) were blended with 70/100 paving grade asphalt. Unmodified and modified asphalt binders were subjected to physicochemical, alkali, acid and fuel resistance tests. The performance tests including, Marshall stability, Marshall Quotient (MQ), tensile strength, tensile strength ratio, flexural strength, rutting resistance and resilient modulus (MR) were carried out on unmodified and modified stone matrix asphalt (SMA) mixtures. The analyses of test results show that the performance of ST-modified asphalt mixtures are better than conventional and styrene–butadiene–styrene (SBS)-modified mixtures. The rutting potential, moisture susceptibility and temperature susceptibility can be reduced by the inclusion of ST in the asphalt mixture. The laboratory MR values are lower than the calculated ones using the empirical equations. The results also revealed that this modifier can be used as anti-stripping agent. It also shows resistance to fuels and most common chemicals. A ST content of 5% by weight of asphalt is recommended for the improvement of the performance of asphalt concrete mixtures similar to that investigated in this study.