Electrochemical impedance behavior of mortar subjected to a sulfate environment – A comparison with chloride exposure models

Samples of reinforced mortar specimens (Sps) were studied over 300 days of exposure in reference, sulfate, and chloride environments. Electrochemical impedance spectroscopy (EIS) was used to investigate external sulfate attack (ESA) in comparison with known chloride models. The study, based on the mortar behavior and its measured electrical properties, highlighted the mechanisms that occur under the pores during the aging. The sulfate samples presented a capacitive behavior at lower frequencies, and the mortar resistance shifted. It was confirmed that EIS is a qualified technique to identify the sulfate attack in concrete by non-destructive methods.