A piezoelectric method for monitoring formaldehyde induced crosslink formation between poly-lysine and poly-deoxyguanosine

To date, no experimental technique has been used to monitor DNA-protein crosslink formation in real-time. Real-time data is important for understanding the underlying chemical mechanisms associated with this reaction process. Here, the novel adaptation of existing piezoelectric quartz crystal (PQC) or quartz crystal microbalance (QCM) technology was used to monitor, in real-time, the formation of a crosslink bond induced by formaldehyde between lysine and guanine. Previous results showed complexes of lysine and guanine constitute a major portion of the DNA-protein crosslinks formed. Thus, poly-lysine5 and poly-deoxyguanosine11 were used as a model system to develop this detection method. Poly-lysine5 was immobilized on QCM electrode surfaces by covalent attachment through polyethylenimine (PEI). Immobilization was confirmed by the decrease in dry QCM frequency; data consistency suggested uniform coatings were produced. The QCM sensor was configured within a thermostatic environmental chamber. The system was calibrated and baseline responses to variations in the analyte solution matrix were identified. QCMs with immobilized poly-lysine5 were placed in contact with formaldehyde and poly-deoxyguanosine11, and crosslink formation was monitored in real-time. Crosslink formation was verified through evaluation of controls. Control assays indicated some of the frequency signal was as aresult of non-specific association. Further assays were conducted after saturation of non-specific binding. This real-time data represents a significant advancement in the state of knowledge of the crosslinking process and provides the experimental foundation for further QCM crosslink investigations.