Synthesis, characterisation and evaluation of polydithiocarbamate resin supported on macroreticular styrene–divinylbenzene copolymer for the removal of trace and heavy metal ions

A new chelating resin was synthesised by the modification of styrene–divinylbenzene (2%) copolymer and incorporation of dithiocarbamate groups. The polydithiocarbamate resin was characterised by elemental analysis, thermal studies and IR studies. The analytical characteristics of the sorbent were established and optimum sorption conditions for Cu, Ni, Pb, Fe, As and Mn determined. The total sorption capacity of the resin was 37 mg g−1 for Ni(II), 35 mg g−1 for Cu(II), 29 mg g−1 for Fe(III) and 23 mg g−1 for Pb(II). The optimum pH for the removal of metal ions was 3–5 for Ni(II), 5 for Cu(II), 4 for Fe(III) and 4–5 for Pb(II). High sorption capacity was observed when compared with other conventional chelating polymers. The sorption kinetics was fairly rapid, as apparent from the loading half time t1/2 values, indicating a better accessibility of the chelating sites.