Life cycle assessment of high temperature electrolysis for hydrogen production via nuclear energy

A life cycle assessment (LCA) of one proposed method of hydrogen production—the high temperature electrolysis of water vapor—is presented in this paper. High temperature electrolysis offers an advantage of higher energy efficiency over the conventional low-temperature alkaline electrolysis due to reduced cell potential and consequent electrical energy requirements. The primary energy source for the electrolysis will be advanced nuclear reactors operating at temperatures corresponding to those required for the high temperature electrolysis. The LCA examines the environmental impact of the combined advanced nuclear-high temperature electrolysis plant, focusing upon quantifying the emissions of carbon dioxide, sulfur dioxide, and nitrogen oxides per kilogram of hydrogen produced. The results are presented in terms of the global warming potential (GWP) and the acidification potential (AP) of the system. The GWP for the system is 2000 g carbon dioxide equivalent and the AP, 0.15 g equivalents of hydrogen ion equivalent per kilogram of hydrogen produced. The GWP and AP of this process are one-sixth and one-third, respectively, of those for the hydrogen production by steam reforming of natural gas, and are comparable to producing hydrogen from wind- or hydro-electricity powered conventional electrolysis.