CFD modelling of accidental hydrogen release from pipelines

Although nowadays hydrogen is distributed mainly by trailers, in the future distribution by means of pipelines will be more suitable if larger amounts of hydrogen are produced on industrial scale. Therefore from the safety point of view it is essential to compare hydrogen pipelines to natural gas pipelines, whose use is well established today. Within the paper we compare safety implications in accidental situations. In the analysis we do not consider technological aspects such as compressors or seals. a CFD (Computational Fluid Dynamics) tool, it is possible to investigate the effects of different properties (density, diffusivity, viscosity and flammability limits) of hydrogen and methane on the dispersion process. In addition CFD tools allow studying the influence of different release scenarios, geometrical configurations and atmospheric conditions. An accidental release from a pipeline is modelled. The release is simulated as a flow through a small hole between the high-pressure pipeline and the environment. A part of the pipeline is included in the simulations as high-pressure reservoir. Due to the large pressure difference between the pipeline and the environment, the flow conditions at the release become critical. e assumed scenarios larger amount of flammable mixture could be observed in case of hydrogen release. On the other hand, because of buoyancy and a higher sonic speed at the release, the hydrogen clouds are farther from the ground level or buildings than in case of the methane clouds, decreasing the probability of ignition and reducing the flame acceleration due to obstacles in case of ignition. Results on the effect of wind in the release scenarios are also described.