Modelling and evaluation of heating strategies for high temperature polymer electrolyte membrane fuel cell stacks

Experiments were conducted on two different cathode air cooled high temperature PEM (HTPEM) fuel cell stacks; a 30 cell 400 W prototype stack using two bipolar plates per cell, and a 65 cell 1 kW commercial stack using one bipolar plate per cell. The work seeks to examine the use of different heating strategies and find a strategy suited for fast start-up of the HTPEM fuel cell stacks. Fast start-up of these high temperature systems enables use in a wide range of applications, such as automotive and auxiliary power units, where immediate system response is needed. The development of a dynamic model to simulate the temperature development of a fuel cell stack during heating can be used for assistance in system and control design. The heating strategies analyzed and tested reduced the start-up time of one of the fuel cell stacks from 1 h to about 6 min.