CFD simulation with detailed chemistry of steam reforming of methane for hydrogen production in an integrated micro-reactor

micro-reactor has drawn more and more attention in recent years due to the process intensification on basic transport phenomena in micro-channels, which would often lead to the improved reactor performance. Steam reforming of methane (SRM) in micro-reactor has great potential to realize a low-cost, compact process for hydrogen production via an evident shortening of reaction time from seconds to milliseconds. This work focuses on the detailed modeling and simulation of a micro-reactor design for SRM reaction with the integration of a micro-channel for Rh-catalyzed endothermic reaction, a micro-channel for Pt-catalyzed exothermic reaction and a wall in between with Rh or Pt-catalyst coated layer. The elementary reaction kinetics for SRM process is adopted in the CFD model, while the combustion channel is described by global reaction kinetics. The model predictions were quantitatively validated by the experimental data in the literature. For the extremely fast reactions in both channels, the simulations indicated the significance of the heat conduction ability of the reactor wall as well as the interplay between the exothermic and endothermic reactions (e.g., the flow rate ratio of fuel gas to reforming gas). The characteristic width of 0.5 mm is considered to be a suitable channel size to balance the trade-off between the heat transfer behavior in micro-channels and the easy fabrication of micro-channels.