Exploiting the use of 3,4-HPO ligands as nontoxic reagents for the determination of iron in natural waters with a sequential injection approach

In this paper, the use of 3-hydroxy-4-pyridinone (3,4-HPO) chelators as nontoxic chromogenic reagents for iron determination is proposed. The potential application of these compounds was studied in a sequential injection system. The 3,4-HPO ligands used in this work were specially designed to complex iron(III) at physiologic pH for clinical applications. The developed sequential injection method enabled to study the reaction conditions, such as buffering and interferences. Then, to further improve the low consumption levels, a microsequential injection method was developed and effectively applied to iron determination in bathing waters using 3,4-HPO ligands. The formed iron complex has a maximum absorbance at 460 nm. The advantage of using minimal consumption values associated with sequential injection, together with the lack of toxicity of 3,4-HPO ligands, enabled to present a greener chemistry approach for iron determination in environmental samples within the range 0.10–2.00 mg Fe/L with a LOD of 7 μg/L. The overall effluent production was 350 μL corresponding to the consumption of 0.48 mg of 3,4-HPO ligand, 0.11 mg of NaHCO3, 0.16 mg of HNO3 and 50 μL of sample. Three reference samples were assessed for accuracy studies and a relative deviation <5% was obtained. The results obtained for the assessment of iron in inland bathing waters were statistically comparable to those obtained by the reference procedure.