Modelling of hydrogen perm-selective membrane reactors for catalytic methane steam reforming

Methane steam reforming is one of the most important pathways for producing high purity hydrogen. In this context, the use of fixed-bed catalytic reactors equipped with hydrogen perm-selective membranes is an interesting alternative for producing high purity hydrogen in one single step. In this work, this reactor is studied by means of numerical simulations using a 2D model, consisting of mass, energy and momentum balances. The fixed-bed is considered to be formed by Ru/SiO2 catalyst particles, especially tailored for steam reforming at low temperature and steam-to-carbon ratio, whereas a composite palladium membrane was considered for hydrogen permeation. The model was validated with experimental data, and the adequacy of a simplified 1D model to simulate the membrane reactor was evaluated and discussed in comparison to the 2D model. Then, the model was used to study the influence of the main operating variables (inlet temperature, pressure, space velocity, steam excess and sweep gas rate in the permeate side) on the reactor performance. Finally, the optimum operating conditions, corresponding to a maximum hydrogen permeation rate, were determined, and the behaviour of the optimized reactor is analysed in detail.