The effect of pretreatment of Vulcan XC-72R carbon on morphology and electrochemical oxygen reduction kinetics of supported Pd nano-particle in acidic electrolyte

The influence of chemical pretreatment of carbon support for oxygen reduction on palladium nano-particles in acidic electrolyte was studied. Vulcan XC-72R carbon as catalyst support for palladium nano-particles was pretreated with 5% HNO3, 0.07 M H3PO4, 0.2 M KOH and 10% H2O2. The effect of treatment on the properties of the carbon support was studied by N2 adsorption and X-ray photoelectron spectroscopy (XPS). It was found that chemical treatment significantly changed the surface chemical properties and surface area of the carbon support. The surface area and pore volume of 5% HNO3 and 10% H2O2 treated carbon supports were drastically decreased due to the oxidative nature of treatment. Ethylene glycol (EG) reduction method was used to synthesise 20% Pd on pr-treated and un-treated carbon supports. Differences in catalyst morphology were characterized using X-ray diffraction, energy dispersive X-ray analysis and transmission electron microscope techniques. It was observed that by using a mild reducing agent, namely EG, well-dispersed and nano-size Pd particles could be achieved during catalyst synthesis. The electrocatalytic activity of different Pd/C catalysts towards the oxygen reduction reaction (ORR) was examined by cyclic voltammetry (CV) on a rotating ring-disc electrode (RRDE) and compared with E-Tek 20% Pd/C catalyst under identical experimental conditions. The kinetics of ORR on these electrocatalysts predominantly involved a four-electron step reduction with the first electron transfer being the rate-determining step. However, the observed specific activity, mass activity and amount of hydrogen peroxide produced during ORR were greatly influenced by the pretreatment employed for carbon support.