Numerical and experiment analysis of residual stress on magnesium alloy and steel butt joint by hybrid laser-TIG welding

Hybrid welding technology has received significant attention in the welding of dissimilar materials recently. While, great welding residual stress and deformation often result by the difference of coefficient of thermal expansion This study describes the thermal elastic–plastic analysis using finite element techniques to analyze the thermo mechanical behavior and evaluate the residual stresses and welding distortion on the AZ31B magnesium alloy and 304L steel butt joint in laser-TIG hybrid welding. A new coupled heat source model was developed which combined by double-elliptic planar distribution, double-ellipsoid body distribution and Rotary–Gauss body distribution model. From the results, it can be concluded that the temperature distribution at the hybrid weld region is exposed to faster rate of heating and cooling in hybrid welding than TIG. Furthermore, compared to the welding stress distribution on the TIG weld, residual stress σy is found about 20% higher on hybrid weld joints, and the residual stress on the 304L steel plate is lower than that on the AZ31B magnesium plate.