An ANFIS model for the prediction of flow stress of Ti600 alloy during hot deformation process

In this paper, an adaptive network-based fuzzy inference system (ANFIS) model has been established to predict the flow stress of Ti600 alloy during hot deformation process. This network integrates the fuzzy inference system with a back-propagation learning algorithm of neural network. The experimental results were obtained from Gleeble-1500 thermal-simulator at deformation temperatures of 800–1100 °C, strain rates of 0.001–10 s−1, and height reduction of 70%. In establishing this ANFIS model, strain rate, deformation temperature and the strain are entered as input parameters while the flow stress are used as output parameter. After the training process, the fuzzy membership functions and the weight coefficient of the network can be optimized. A comparative evaluation of the predicted and the experimental results has shown that the ANFIS model used to predict the flow stress of Ti600 titanium alloy has a high accuracy and with absolute relative error is less than 17.39%. Moreover, the predicted accuracy of flow stress during hot deformation process of Ti600 titanium alloy using ANFIS model is higher than using traditional regression method, indicating that the ANFIS model was an easy and practical method to predict flow stress for Ti600 titanium alloy.