New closure models for CFD modeling of high-density circulating fluidized beds

Experimental results from a high-density circulating fluidized bed (CFB) riser have been used to develop new closure models for the drag coefficient and the gas–solid mixture viscosity. The models predict a rapid increase in both viscosity and drag associated with the high solids concentrations near the riser wall. These new models have been incorporated into the commercial Computational Fluid Dynamics software FLUENT and the predictions of FLUENT have been compared with experimental data from the literature. With the inclusion of the new closure models, FLUENT was able to predict the radial distribution of solids concentration and solids mass flux found experimentally in three different cold-flow CFB risers operated at solids mass fluxes between 148 kg/m2·s and 455 kg/m2·s and superficial gas velocities between 4.7 and 10 m/s. These conditions lead to average solid concentrations in excess of 10 vol%, which corresponds to high-density CFB operation.