• Title of article

    Strength prediction of adhesively bonded joints under cyclic thermal loading using a cohesive zone model

  • Author/Authors

    Hu، نويسنده , , P. and Han، نويسنده , , X. and da Silva، نويسنده , , L.F.M. and Li، نويسنده , , W.D.، نويسنده ,

  • Issue Information
    روزنامه با شماره پیاپی سال 2013
  • Pages
    10
  • From page
    6
  • To page
    15
  • Abstract
    Structural adhesives are being widely adopted in aerospace and automobile industries. However, in many cases, hostile environments cause non-ignorable degradation in joints mechanical performance. In this work, a combined experimental–numerical approach was developed to characterise the effect of cyclic-temperature environment on adhesively bonded joints. The environmental degradation factor, Deg, was introduced into a cohesive zone model to evaluate the degradation process in the adhesive layer caused by the cyclic-temperature environment and the stress states in adhesive layer before and after temperature exposure treatment were investigated. Carefully designed experimental tests were carried out to validate the simulation results and help the numerical procedure to predict joint mechanical behaviour after environmental exposure. A response surface method was utilised to provide a better visualisation on the relationship between selected factors and response. Finally, the scanning electron microscopy was carried out to investigate the micro fracture mechanisms of adhesively bonded joints.
  • Keywords
    Response surface method , Single lap joints , adhesively bonded joints , cohesive zone model , structural adhesive
  • Journal title
    International Journal of Adhesion and Adhesives
  • Serial Year
    2013
  • Journal title
    International Journal of Adhesion and Adhesives
  • Record number

    1699967