Surface characterisation of selected sorbent materials for common hydrocarbon fuels

The need to find the most efficient material for the clean-up of oil/fuel spills both at sea and on land is of extreme importance. Generally, this requires material selection based upon the adsorption properties of selected sorbent materials such as sand, swelling clays, organo-clays and cotton fibres. These adsorption properties are a function of the surface characterisation where hydrophobic and oleophilic properties are essential. From BET analysis, the adsorption isotherm of the selected materials was Types II and IV in the IUPAC classification scheme. The main adsorption mechanism for these sorbents occurred on the external surface of the material in the pores or capillaries. ESEM studies indicate that cotton capillaries contribute significantly to the adsorption process of oil. In addition, the presence of surface wax on cotton–cellulose fibre facilitated the uptake by: (a) providing a relatively hydrophobic surface for sorption of organics; and (b) providing a low surface energy environment for the capillaries to aid in oil transport. Cotton fibre was observed to have several key properties such as hydrophobicity, good affinity for hydrocarbons, rapid adsorption on contact, and high adsorption and retention through interfibre capillaries. This research provides the basis for selection of cotton–cellulose fibres compared to common and other novel alternatives such as sand and organo-clays, respectively.