Pressure–volume–temperature properties for binary and ternary polymer solutions of poly(ethylene glycol), poly(propylene glycol), and poly(ethylene glycol methyl ether) with anisole

Pressure–volume–temperature properties were measured for polymer solutions of poly(propylene glycol) (PPG)+anisole, polymer blends of PPG+poly(ethylene glycol methyl ether) (PEGME), and the blends of PPG+PEGME and poly(ethylene glycol) (PEG)+PPG with anisole at temperatures from 298.15 to 348.15 K and pressures up to 50 MPa. The Tait equation represents accurately the pressure effect on the liquid densities over the entire pressure range. The excess volumes change from positive to negative as increasing the mole fraction of PPG in the binary systems of PPG+anisole and PPG+PEGME. The volumetric data of the related binary systems were correlated with the Flory–Orwoll–Vrij and the Schotte equations of state to determine the binary parameters. By using these determined binary parameters, both equations predicted the specific volumes of the polymer blends with anisole to average absolute deviations of better than 0.13%.